Building a fake wall

To build a flat or a fake wall you need a 4x8 piece of plywood and masonite is cheap and smooth to work with. then smaller pieces of wood to support them up. then nail the smaller pieces of wood around the big sheet of masonite and nail them together then glue to edges and lay the masonite on top then nail it down. then for the jacks to set up the wall cut a 4x8 piece of plywood diagonally. then cut a gouge into the hypotenuse of the triangle at about the halfway point. then lay the flat down and measure 2 inches from the top and bottom. then drill pilot holes in the top and bottom and into frame then screw in. stand the flat upright then drill more pilot holes and screw it into place. finally get a hanging weight like a sand bag to hold down the flat. then you should be done and send it in to art department to make visually appealing.